Top Performer in Europe

The Eurocargo range of trucks is a top performer in Europe and was named the International Truck of the Year 2016 by a panel of top European truck journalists. Eurocargo is the reason the Iveco truck brand is considered to be a major player there.

Here, the new-look Eurocargo has arrived in Australia, with a Euro VI engine and cleaner lines, but it is selling in a truck market under 18 tonnes gross vehicle mass (GVM) trained by the Japanese, who control well over 90 per cent of the market, to buy a generic product on price and back-up. Read more

The Trucking World On Instagram

Diesel News looks at the trucking world on Instagram and finds some talented sharp shooters looking to show the trucking industry at its best.

This is great shot, taken at night of one of th V8 Supercars teams transporter at Willowbank Raceway in Queensland. Read more

Top Female Driver, Australian Truck Manufacturing, Penske Dealership Change and Autonomous Trucks

In the news this week have been a Top Female Driver, Australian Truck Manufacturing, Penske Dealership Change and Autonomous Trucks and the need for supporting infrastructure.

Tasmanian Kerri Connors, of Caltas, was named winner of the 2017 Volvo Drivers’ Fuel Challenge on-road category in a competition which put Australia’s most fuel-efficient drivers head to head. The off-road title was claimed by Cameron Simpson of Simpson’s Fuel in Victoria. Over a two-day event at Mt Cotton in Queensland, the competition was whittled down from 17 drivers in the semi-final, to nine in the final. Read more

New Models From International

This year will see the introduction of a number of new models from International. There are four basic models in the new ProStar range arriving on the Australian truck market – a day-cab prime mover, a day-cab tipper chassis, an extended cab sleeper and a 40-inch sleeper-cab prime mover option.

All of these will have just one engine option – the Cummins X15, the renamed evolution of the highly successful E5 ISX. It will be rated at 550hp (410kW) and put out 2,580Nm (1850 ft lb) of torque. This is probably the most popular engine and rating in the Australian heavy-duty market. So no surprises there. Read more

Truck Of The Future From Iveco

Back in the ‘80s and ‘90s, Europe’s truck manufacturers liked to spring the odd surprise at the various annual shows. By ‘odd’ I mean those wonderfully futuristic concept trucks that looked great under the spotlights, before eventually ending-up in some dusty corner of the R&D department…or scrapped. Read more

Stralis Hi-Way’s Smart Fuel Saving 

Smart Fuel Saving 

When the second generation Stralis Hi-Way’ smart fuel saving was unveiled to the press (it went on to win the International Truck of the Year award for 2013) the Italians made great play of the fact that the driving force behind their new long-haul heavy was a major reduction in its Total Cost of Ownership (TCO). Here is a brief run down on the latest Stralis range from Diesel News’ European Correspondent, Brian Weatherley.

Stralis Hi-Way’s Smart Fuel Saving 

Thanks to major savings in fuel the latest range-topping Stralis ‘XP’ (it stands for Extra Performance) offers long-haul operators significant reductions in CO₂ emissions too. So much so the clever marketing folk in Turin are calling their Stralis XP flagship a ‘TCO₂ Champion’…(TCO/TCO₂ geddit?)

Underneath the cab is where the major fuel-saving changes can be found, in particular the latest Euro  6 ‘C’ Hi-SCR Cursor 9, 11 and 13 in-line six diesels, which boast lower internal friction, thanks to re-profiled pistons and a revised ring pack, better thermal management, a new anti-idling function and, on selected long-haul Stralis XP variants, so-called ‘Smart’ engine auxiliaries to prevent parasitic losses when they’re not needed.

These include the clutch compressor and air-processing unit, an energy-recovery alternator with intelligent battery monitoring and a variable-flow steering pump. Smart ancillaries are definitely the in-thing for all the engine-makers right now, or at least until the next major step-change improvement in engine brake thermal efficiency comes along in the shape of waste-heat recovery, something Iveco is also working on.

The Euro 6 Cursor engine line-up remains virtually unchanged in terms of power and torque outputs. New arrivals are the 480hp top-rating on the Cursor 11 and the slightly-more powerful (by 10hp) range-topping 570 hp Cursor 13 (for Europe). Both feature what Iveco calls ‘Smart EGR’.

What the Italians have done on both these engines is to advance their injection timing to get better combustion and improved fuel economy. Naturally, the downside of advancing the timing is you create greater heat inside the combustion chamber, which produces more NOx. Not what you want.

Stralis Hi-Way’s Smart Fuel Saving 

However, by adding a small amount (only eight per cent) of exhaust gas recirculation back into the combustion chamber the engine-out NOx levels on the 480 and 570 Cursor remain the same as before, with the exhaust gases treated in the normal way by the Italian ’s Hi-SCR (selective catalytic reduction) system, without any change in AdBlue dosing levels.

The fuel savings of Smart EGR alone are roughly between 1 and 1.5 per cent. Other energy-saving engine enhancements include, the new reduced friction 2.47:1 Meritor back-axle (it’s the longest ratio in its class and lowers engine revs by seven per cent), the latest low-rolling resistance triple ‘A’ X-Line Energy Michelin eco tyres, plus the all-new Hi-Tronix 12-speed gearbox and the GPS-based Hi-Cruise predictive cruise control with eco-roll, and together they all add-up to 11 per cent fuel gain. Overall the new driveline changes represent a double-digit improvement over the previous Stralis.

Talking of the Stralis ’s latest Hi-Tronix two-pedal auto, it represents the very first installation of the all-new ‘TraXon’ automated transmission from ZF in a European heavy truck chassis. Hi-Tronix takes over the cog-swapping duties on the Stralis from the previous AS-Tronic auto, again supplied by ZF but called EuroTronic by Iveco.

Meanwhile, Iveco ’s chassis engineers have also got in on the act by completely redesigning the Stralis’s rear suspension which, while more durable is actually lighter to the tune of 45 kg. Higher resistance to corrosion, achieved with surface treatment of all key metallic components, means lower maintenance costs too. Last but not least, New Stralis has a completely new electrics and pneumatics layout which has helped bring repair and maintenance costs down by between five and eight per cent compared with the previous models, further underpinning Iveco’s commitment to reduce its overall TCO.

 

An International Trucks Deal, Autonomous Trucks, Low Fuel Volvo and a New UD

The Return of International Trucks

The long anticipated announcement of the return of International Trucks to the Australian market has been made public this week. This follows 18 months of speculation about who would distribute the US brand, after its relaunch at the Brisbane Truck Show in 2015.

 

The Return of International Trucks

 

The joint announcement by CNH Industrial and Navistar tells us Iveco in Australia has been appointed sole distributor of International Trucks in this market. The exact details are still being finalised by both parties as they evaluate several models, like the ProStar, and others offered in the US market.

 

This means we will see the return of the International brand to its home in Australia for many years, Iveco’s Dandenong headquarters and production plant, where International trucks were produced from 1952 until the late nineties. The current Acco model sold by Iveco started life as the International Acco in the sixties and remains a stalwart of the Iveco range.

 

The Return of International Trucks

 

“Despite not having sold here for a number of years, ‘Inter’ is still entrenched in the Australian market and remembered fondly by fleet operators, this enthusiasm for the marque was also highlighted at the 2015 Brisbane Truck Show with both the ProStar and LoneStar display trucks capturing show-goers’ imaginations,” said Mark Belisle, Navistar SVP Distribution and Export. “Of course, the return of a brand to Australia that is so well regarded, deserved a detailed plan befitting its standing here, and that meant establishing a partnership with a company that was well equipped to assist in properly relaunching in the local market.

 

“In CNH Industrial we’ve found a partner with the necessary credentials and industry experience to help Navistar meet its goals here. The close history between CNH Industrial’s Iveco brand and International is not lost on us either, it adds an element of emotion to the partnership.

 

“We look forward to the months ahead and bringing some exciting new International vehicles to market.”

 

The Return of International Trucks

 

Also recalling the long historical association between the Iveco organisation here and the International brand, CNH Industrial Executive Managing Director ANZ, Ray Osgood, said he was extremely pleased to have established a partnership with Navistar for the distribution rights.

 

“International had a long and successful history in Australia and dominated the commercial vehicle market for several decades, there remains a lot of passion for the brand here today, and it still has a lot of equity in this market.

 

“CNH Industrial is extremely excited at the prospect of partnering with Navistar in reintroducing the iconic International Trucks to Australia. Our operational experience with Iveco and the obvious synergies and history between the two brands will provide notable efficiencies as the International range is introduced in the months ahead.

 

“Furthermore, we see the arrangement to be mutually beneficial in that the International product range primarily consisting of conventional cabs, will compliment Iveco’s strengths in cab-over truck models.”